CONDENSATE SEPARATOR FLOAT THREADED / FLANGE ADCA FLT 14I DN 15 – 20
TECHNICAL DESCRIPTION
The stainless steel thermostatic steam traps with air vent – TSS22 are specially designed for use in industrial equipment such as autoclaves, sterilizers, equipment for the food and chemical industries. Their small size makes them preferred for installation in such equipment. The connection is threaded.
TECHNICAL CHARACTERISTICS
The stainless steel float steam traps model FLT 14I (with thermostatic air vent) are designed to operate over a wide range of operating pressures and can be used in both low and high pressure systems. Their typical application is in heaters and heat exchangers, dryers, pressure vessels and other applications where continuous condensate drainage is required. The connection is made by thread or flange and horizontal and vertical installation is possible.
WORKING FLUID / MEDIUM
• Saturated and superheated steam
EXECUTION
• threaded: ISO7/1 Rp (BS21)
• flanged: EN 1092-1 PN16 or ANSI #150
• models: FLT14I-4,5, 10 and 14
INSTALLATION INSTRUCTIONS
• In horizontal or vertical position.
MAIN ADVANTAGES
• Controlled condensation.
• Drainage of condensate at a constant temperature.
• Not affected by small or large changes in system load and pressure.
• Excellent air venting (via thermostatic air vent).
Dimensions: 1/2″ – 3/4″
Materials
| No. | POSITION | MATERIAL |
|---|---|---|
| 1 | Body | CF8M / 1.4408 |
| 2 | Lid | CF8M / 1.4408 |
| 3 | Gasket | stainless steel / graphite |
| 4 | Saddle | AISI 410 / 1.4006 |
| 5 | Valve | AISI 440C / 1.4125 |
| 6 | Shoulder | AISI 304 / 1.4301 |
| 7 | Float | AISI 304 / 1.4301 |
| 8 | Thermostatic air vent | stainless steel (bimetallic) |
| 9 | Bolt | stainless steel A2-70 |
Features
| SPECIFICATION | |
|---|---|
| Standard | DIN |
| Joining | threaded 1/2" - 3/4"; flanged EN 1092-1 PN16 or ANSI #150 |
| Lid connection | bolted |
| Execution | straight |
| Venting | automatically |
| Installation | horizontal / vertical |
| Maximum differential pressure | 4.5; 10; 14 Bar |
Flow rate
| PASSABILITY (kg/h) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MODEL | SIZE | DIFFERENTIAL PRESSURE (bar) | ||||||||||||
| DN | 0.5 | 1 | 1.5 | 2 | 3 | 4.5 | 6 | 7 | 8 | 9 | 10 | 12 | 14 | |
| FLT14I - 4.5 | 15 to 20 | 200 | 280 | 320 | 360 | 400 | 495 | - | - | - | - | - | - | - |
| FLT14I - 10 | 15 to 20 | 110 | 140 | 175 | 190 | 230 | 280 | 300 | 330 | 350 | 390 | 405 | - | - |
| FLT14I - 14 | 15 to 20 | 70 | 100 | 120 | 140 | 155 | 190 | 210 | 220 | 225 | 230 | 260 | 280 | 300 |
Limits
| MAXIMUM WORKING CONDITIONS | ||
|---|---|---|
| Maximum working pressure / Bars | T max. [°C] | |
| Flanged EN PN 16 | Flanged ANSI 150 lb | |
| 16 bar | 16 bar | 100 °C |
| 14.5 bar | 14.8 bar | 150 °C |
| 13.4 bar | 13.6 bar | 200 °C |
| 12.7 bar | 12 bar | 250 °C |
| DIMENSIONS (mm) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| THREADS | FLANGED EN PN 16 | FLANGED ANSI #150 lb | |||||||
| SIZE | A | B | C | D | (kg) | F | (kg) | F | (kg) |
| 1/2" DN 15 | 95 | 160 | 23 | 100 | 3.5 | 150 | 5 | 150 | 4.5 |
| 3/4” DN 20 | 95 | 160 | 23 | 100 | 3.5 | 150 | 5.5 | 150 | 4.7 |
Related products
CONDENSATE TRAP WITH INVERTED PISTON ADCA IB30S / IB30SS
FLOAT FLANGE / THREADED CONDENSATE SEPARATOR ADCA FLT 14I – DN 40-50
FLOAT SEPARATOR THREADED / FLANGE ADCA FLT 17
THERMODYNAMIC THREADED / FLANGED CONDENSATE TRAP ADCA DT 40/2
THERMODYNAMIC THREADED / FLANGED CONDENSATE TRAP ADCA DT 46
THERMODYNAMIC THREADED CONDENSATE TRAP TLV A3N
THERMOSTATIC CONDENSATE TRAP WITH AIR BREATHER THREADED / FLANGED ADCA TH35/2 – TH35/3
